Nissan e-NV200 Combi Van Charging Cable
Type 2 EV charging cable, up to 7.4kW
- Free next-working-day delivery - order before 4pm
- 30-day returns, we pay the postage if it doesn't fit
- 2-year minimum manufacturer warranty, and we handle the claim
- UK-based support, 8am-6pm, from people who drive EVs
Overview
We stock the e-NV200 Combi Van cable in two lengths as standard, 5m and 10m, and we can source other lengths on request. It is a TÜV and CE certified lead capable of delivering up to 7.4kW, though bear in mind the van itself caps AC charging at 6.6kW: no cable will push past what the onboard charger accepts.
Because it uses UK and EU standard connectors, you have the freedom to charge from a household supply, a workstation, or a public charging unit with a Type 2 socket. The cable is heavily weatherproofed and comes with rubber caps that stop the outside elements reaching the EV connectors when the lead is not in use. The connector pins are also insulated with a plastic covering.
Charging times
| Rating | Capacity | Time to charge | Our recommendation |
|---|---|---|---|
| Single-phase, 16A | 3.7 kW | 12h 15m | |
| Single-phase, 32A | 7.4 kW | 7h 00m | Best fit |
All our cables come with a two-year manufacturer warranty and free UK delivery on orders over £150, dispatched the same day if you order before 4pm. If you need a length we do not list, or you are not certain which lead your van takes, email or telephone the sales team and we will sort it out. More options in EV charging cables.
If you need a lead for a different Nissan, start from our Nissan charging cables page.
Specifications
- Connector
- Type 1 to Type 2 / 3-Pin
- Standard
- IEC 62196-2 Type 1 (SAE J1772), 5-pin
- Cable lengths
- 5m, 10m
- Rated power
- 2.3kW / 3.6kW / 7.2kW
- Current
- 6–12A / 16A / 32A
- Phase
- Single-phase
- Conductor
- 2.5-6mm² copper (by current rating)
- Weatherproofing
- IP55
- Operating temperature
- -30°C to +60°C
- Build
- Run-over proof (drive-over resistant)
- Certifications
- CE marked, TÜV certified, IEC 62196-2 (Type 1)
- Warranty
- 24 months (2 years) manufacturer warranty
Features
-
Run-over proof
Built to take the weight of a car, so you can drive over the cable without damaging it (protection against pressure).
-
All-weather rated
Rated IP55 and built to operate from -30°C to +60°C, so it charges reliably through UK rain, frost and summer heat.
-
Type 1 vehicle fit
Made for Type 1 (SAE J1772) electric vehicles. The Type 2 version plugs into any UK/EU home wallbox or public AC charge point.
-
CE / TÜV certified
Independently certified to CE and TÜV, and built to the IEC 62196-2 Type 1 (SAE J1772) connector standard.
-
3-pin option for home sockets
Choose the 3-pin version to top up from a standard UK domestic socket when there is no wallbox nearby. It is a separate cable option, not an attachment.
Installation
- 01Unlock the car - most won't accept a cable while locked.
- 02Wallbox end first, then the car. Push until the latch clicks.
- 03Check the car shows a charging state before you walk away.
- 04Coil loosely into the bag - no tight figure-of-eights.
In the box
-
Charging cable
1
FAQs
Is this cable compatible with the Nissan e-NV200 Combi Van?
Which cable length should I choose?
Can I use it at public charge points as well as at home?
What's the 3-pin option for?
Is it safe to leave outside in the rain?
What warranty and delivery do I get?
Compatibility
- Nissan e-NV200 Combi Van
- All Type 2 electric vehicles (UK & EU, most post-2018)
- Charger: Ohme
- Charger: Pod Point
- Charger: Zappi
- Charger: Hypervolt
- Charger: myenergi
- Charger: Wallbox
- Charger: EO
- Charger: Andersen
- Charger: Tesla
What customers say about us
-
First class service
First class service. Ordered 15m cable and it was delivered next day. Minor hiccup in that the accompanying bag was missing. Quick email to Jake at EV Cable Hub and the bag arrived next working day. 1st class product and even better customer service. Thank you.
Bought from us? A review helps the next person choose.