V2L vehicle to load discharge cable
Gallery filters to selection
Ingress protection IP44
Available lengths 0.5m, 2.5m, 5m, 10m, 15m
Vehicle fitment Renault 5 E-Tech electric
Vehicle connection Type 2 charge port

Renault 5 E-Tech V2L Adapter (Vehicle to Load)

A simple adapter power source (Renault 5 E-Tech)

In stock
From £162.99complete your selection for the exact price
Outlet Socket
Color
LengthWallbox to port, then add 2m
Selected Not with this selection Sold out / locked
Add a storage bag?
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Klarna
  • Maestro
  • Mastercard
  • Shop Pay
  • Union Pay
  • Visa
  • Free next-working-day delivery - order before 4pm
  • 30-day returns, we pay the postage if it doesn't fit
  • 2-year minimum manufacturer warranty, and we handle the claim
  • UK-based support, 8am-6pm, from people who drive EVs

Overview

Mains power from your Renault 5 E-Tech

The new Renault 5 can give power as well as take it. Keep this lead in the boot and the picnic kettle, or the laptop on a long stop, runs from the car.

Switching it on

Plug it into the Type 2 charge port, then press and hold the button on the Type 2 connector for three seconds. Press it again to stop.

What it will run

Up to 3kW through a UK 3-pin outlet, or 3.6kW on CEE and Schuko, depending on the car. A 60W laptop charger, a 45W cool box and LED lights barely register. A standard 3kW kettle is right at the limit through the 3-pin socket, so a 2kW travel kettle is the safer choice, and the same goes for fan heaters on full.

Which car it fits

Renault 5 E-Tech electric. The car decides whether discharge is available, so the lead only works on models that support V2L. If you are unsure, our car finder will check your registration.

An important warning

A vehicle-to-load lead must never be connected to any other electrical system, such as a house, a caravan hook-up or a generator inlet. There is no voltage or phase synchronisation, so doing it can seriously damage both the car and the other system, and it will void your vehicle warranty.

The lead itself

  • 16A cable, 3G1.5 conductor, 10.5mm diameter
  • IP44: works in dusty conditions and resists splashes while connected, but must never sit in water
  • Black, with a choice of outlet and lengths from 0.5m to 15m
  • Keep the rubber dust cap on when it is stored, so grit and moisture stay out of the pins

Other Renault leads are on our Renault V2L page, and every car we cover is in the V2L adapter range.

Specifications

Product type
V2L (vehicle to load) discharge cable, sometimes called V2D
Vehicle fitment
Renault 5 E-Tech electric
Vehicle connection
Type 2 charge port
Activation
Button on the connector, held for three seconds
Rated output
Up to 3kW through a UK 3-pin outlet, or 3.6kW on CEE and Schuko, depending on the car.
Available lengths
0.5m, 2.5m, 5m, 10m, 15m
Colour
Black
Cable specification
16A, 3G1.5, 10.5mm diameter
Ingress protection
IP44

Features

  • Made for the Renault 5 E-Tech

    Renault 5 E-Tech electric. Plug it in, switch discharge on and you have a UK socket.

  • Switching it on

    Plug it into the Type 2 charge port, then press and hold the button on the Type 2 connector for three seconds. Press it again to stop.

  • What it will run

    Up to 3kW through a UK 3-pin outlet, or 3.6kW on CEE and Schuko, depending on the car. A 2kW travel kettle, a cool box, lights and most cordless tool chargers.

  • Outlet and length to suit

    A choice of outlet and five lengths from 0.5m to 15m, all in black.

  • 16A cable, IP44 rated

    3G1.5 conductor at 10.5mm diameter. Splash resistant while connected, but never leave it sitting in water.

Installation

  1. 01Park up and leave the car in the mode its handbook specifies for discharge.
  2. 02Plug the connector into the car's charge port until the latch clicks.
  3. 03Enable discharge on the car - the infotainment menu or the button on the connector, depending on the model. See Specifications for this one.
  4. 04Check the socket is live before you plug anything in, and keep the outlet end dry and off the ground.

FAQs

Does it fit the Renault 5 E-Tech?
Yes, the Renault 5 E-Tech is on the fitment list. Hold the button on the Type 2 connector for three seconds to start discharge.
How do I switch the discharge on?
Plug it into the Type 2 charge port, then press and hold the button on the Type 2 connector for three seconds. Press it again to stop.
How much can I run from it?
Up to 3kW through a UK 3-pin outlet, or 3.6kW on CEE and Schuko, depending on the car. A 60W laptop charger, a 45W cool box and LED lights barely register. A standard 3kW kettle is right at the limit through the 3-pin socket, so a 2kW travel kettle is the safer choice, and the same goes for fan heaters on full.
Which length should I choose?
The 0.5m lead suits plugging in an extension next to the car. Go for 5m or 10m if you want the socket at a tent, an awning or a workbench without trailing anything else.
Can I plug it into my house or a caravan hook-up?
No. A vehicle-to-load lead must never be connected to any other electrical system, such as a house, a caravan hook-up or a generator inlet. There is no voltage or phase synchronisation, so doing it can seriously damage both the car and the other system, and it will void your vehicle warranty.

Compatibility

  • Renault 5 E-Tech
UK 1 Gang / Black / 0.5m £162.99

What customers say about us

  • First class service

    First class service. Ordered 15m cable and it was delivered next day. Minor hiccup in that the accompanying bag was missing. Quick email to Jake at EV Cable Hub and the bag arrived next working day. 1st class product and even better customer service. Thank you.

    Bromley Philip 20 August 2026Read it on Trustpilot

Review us on Trustpilot

Bought from us? A review helps the next person choose.