BYD Dolphin Charging Cable, Type 2 to Type 2 Charging Cable
Gallery filters to selection
Operating temperature -30°C to +60°C
Available lengths 5m, 10m, 15m, 20m
Vehicle connector Type 2
Fits BYD Dolphin
Type 25m: 20mUp to 22kW1 & 3 PhaseHome & Public

BYD Dolphin Charging Cable

Type 2 EV charging cable: up to 22kW, single and three-phase

In stock
From £124.99complete your selection for the exact price
Choose a Cable Type:
Choose a Cable Length:Wallbox to port, then add 2m
Choose a Rated Power (Charge Speed):
Selected Not with this selection Sold out / locked
Add a storage bag?
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Klarna
  • Maestro
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa
  • Free next-working-day delivery - order before 4pm
  • 30-day returns, we pay the postage if it doesn't fit
  • 2-year minimum manufacturer warranty, and we handle the claim
  • UK-based support, 8am-6pm, from people who drive EVs

Overview

The Dolphin is BYD's small hatchback, and like everything else sold here it charges on a Type 2 socket.

Its onboard AC charger depends on trim. The entry cars are limited to around 7kW, the higher trims take 11kW. In practice this matters less than it sounds, because a normal UK home supply caps you near 7.4kW either way. A 32A single-phase cable therefore suits every version of the car on a home wallbox, and it is the one we would point most Dolphin owners at.

Where the trim does matter is public charging. If yours takes 11kW and you regularly use a 22kW post, a three-phase lead will let it draw more than a single-phase one. If you only ever charge on the drive, that difference never shows up.

Two leads cover the car

  • Type 2 to Type 2. The one you will use daily, on home wallboxes and public posts alike. 5m if the charger sits beside where you park, 10m if it is on the far wall or you use public bays.
  • Type 2 to 3-pin. A Mode 2 lead for a household socket. At 2.3kW it is slow and no substitute for a wallbox, but it is worth keeping in the boot.

Every cable we sell is CE and TUV certified, IP55 rated against British weather, and carries a two-year warranty. Compare lengths in our 32A single-phase range.

Other BYD fitments are grouped on our BYD charging cables page.

Specifications

Fits
BYD Dolphin
Vehicle connector
Type 2
Vehicle onboard AC charger
Around 7kW on entry trims, 11kW on higher trims
Cable type options
Type 2 to Type 2, or Type 2 to 3 Pin (Mode 2)
Available lengths
5m, 10m, 15m, 20m
Rated power options
16amp (3.6kW), 32amp (7.2kW), 32amp three phase (22kW), 6amp to 12amp adjustable (2.3kW)
Suits every trim at home
32A single-phase Type 2 to Type 2
Standard
IEC 62196-2 (Type 2 / MENNEKES), 7-pin
Conductor
2.5-6mm² copper (by current rating)
Weatherproofing
IP55 (IP67 on Type 2 to 3-Pin)
Operating temperature
-30°C to +60°C
Build
Run-over proof (drive-over resistant)
Certifications
CE marked, TÜV certified, IEC 62196-2 (Type 2)
Warranty
24 months (2 years) manufacturer warranty

Features

  • Type 2, whichever trim you have

    The Dolphin is BYD's small hatchback, and like everything else sold here it charges on a Type 2 socket.

  • One cable covers all versions at home

    A normal UK home supply caps you near 7.4kW whatever the trim, so a 32A single-phase cable suits every version of the car on a home wallbox.

  • Trim matters on public posts

    If yours takes 11kW and you regularly use a 22kW post, a three-phase lead will let it draw more than a single-phase one. Charge only on the drive and that difference never shows up.

  • Four lengths to match the parking

    5m if the charger sits beside where you park, 10m if it is on the far wall or you use public bays, plus 15m and 20m.

  • Built for the weather

    CE and TUV certified, IP55 rated, and backed by a two-year warranty.

Installation

  1. 01Unlock the car - most won't accept a cable while locked.
  2. 02Wallbox end first, then the car. Push until the latch clicks.
  3. 03Check the car shows a charging state before you walk away.
  4. 04Coil loosely into the bag - no tight figure-of-eights.

In the box

  • Charging cable Charging cable 1

FAQs

Which cable should I get for my Dolphin?
For home charging, the 32A single-phase Type 2 to Type 2 lead. It suits every version of the car, because a normal UK home supply caps you near 7.4kW whether your trim takes 7kW or 11kW.
Does my trim change the answer?
Only for public charging. The entry cars are limited to around 7kW and the higher trims take 11kW. If yours takes 11kW and you regularly use a 22kW post, a three-phase lead lets it draw more.
Will a three-phase cable speed up home charging?
No. Without a three-phase supply at the property there is nothing extra for it to draw, so the difference never shows up on the drive.
What is the 3-pin option?
A Mode 2 lead for a household socket. At 2.3kW it is slow and no substitute for a wallbox, but it is worth keeping in the boot.
How do I choose the length?
5m if the charger sits beside where you park, 10m if it is on the far wall or you use public bays. Longer 15m and 20m options exist for awkward driveways.
What certification do the cables carry?
Every cable we sell is CE and TUV certified, IP55 rated against British weather, and carries a two-year warranty.

Compatibility

  • BYD Dolphin
  • All Type 2 electric vehicles (UK & EU, most post-2018)
  • Charger: Ohme
  • Charger: Pod Point
  • Charger: Zappi
  • Charger: Hypervolt
  • Charger: myenergi
  • Charger: Wallbox
  • Charger: EO
  • Charger: Andersen
  • Charger: Tesla
Type 2 to Type 2 Charging Cable / 5M / 16amp (3.6kW) £124.99

What customers say about us

  • First class service

    First class service. Ordered 15m cable and it was delivered next day. Minor hiccup in that the accompanying bag was missing. Quick email to Jake at EV Cable Hub and the bag arrived next working day. 1st class product and even better customer service. Thank you.

    Bromley Philip 20 August 2026Read it on Trustpilot

Review us on Trustpilot

Bought from us? A review helps the next person choose.