Bentley Charging Cable
Type 2 EV charging cable: up to 22kW, single and three-phase
- Free next-working-day delivery - order before 4pm
- 30-day returns, we pay the postage if it doesn't fit
- 2-year minimum manufacturer warranty, and we handle the claim
- UK-based support, 8am-6pm, from people who drive EVs
Overview
Bentley's plug-in hybrids use a Type 2 socket, and the battery behind it is small by electric-car standards. That single fact settles the whole buying decision.
A plug-in hybrid pack fills in a few hours on almost any lead, so paying for a 22kW three-phase cable buys nothing at all. Even the 16amp cable will have the car full overnight. The variable that actually matters is length, and on a car this size the charge port routinely ends up further from the wall than owners expect.
Worth noting if the car is driven by someone else: the cable is the thing that gets left behind. A second lead that lives permanently in the boot costs less than the inconvenience of discovering the first one is at the office.
Every cable is CE and TUV certified, IP55 rated and carries a two-year warranty.
Specifications
- Fits
- Bentley Bentayga and Flying Spur plug-in hybrids
- Vehicle connector
- Type 2
- Onboard AC charger
- Modest, as on most plug-in hybrids
- Standard
- IEC 62196-2 (Type 2 / MENNEKES), 7-pin
- Conductor
- 2.5-6mm² copper (by current rating)
- Weatherproofing
- IP55 (IP67 on Type 2 to 3-Pin)
- Operating temperature
- -30°C to +60°C
- Build
- Run-over proof (drive-over resistant)
- Certifications
- CE marked, TÜV certified, IEC 62196-2 (Type 2)
- Warranty
- 24 months (2 years) manufacturer warranty
Features
-
A plug-in hybrid battery fills on any lead
Even the 16amp cable has the car full overnight, so the three-phase version buys nothing.
-
Length is the variable that matters
On a car this size the charge port routinely sits further from the wall than owners expect.
-
A second lead for the boot
The cable is the thing that gets left behind, particularly on a car more than one person drives.
-
Matched to the Bentley charge port
Both plug-in hybrids charge through a Type 2 socket, and every cable here ends in the matching connector.
Installation
- 01Unlock the car - most won't accept a cable while locked.
- 02Wallbox end first, then the car. Push until the latch clicks.
- 03Check the car shows a charging state before you walk away.
- 04Coil loosely into the bag - no tight figure-of-eights.
In the box
-
Charging cable
1
FAQs
What cable does a Bentley plug-in hybrid need?
Is the 22kW three-phase cable worth buying?
Do the Bentayga and Flying Spur take the same cable?
What is covered by the warranty?
Compatibility
- Bentley Bentayga Hybrid
- Bentley Flying Spur Hybrid
- All Type 2 electric vehicles (UK & EU, most post-2018)
- Charger: Ohme
- Charger: Pod Point
- Charger: Zappi
- Charger: Hypervolt
- Charger: myenergi
- Charger: Wallbox
- Charger: EO
- Charger: Andersen
- Charger: Tesla
What customers say about us
-
First class service
First class service. Ordered 15m cable and it was delivered next day. Minor hiccup in that the accompanying bag was missing. Quick email to Jake at EV Cable Hub and the bag arrived next working day. 1st class product and even better customer service. Thank you.
Bought from us? A review helps the next person choose.